Simple Woodturning Tools - Simple Shear Cutting Finisher® with Foam Grip Handle

Description

Simple Woodturning Tools - Simple Shear Cutting Finisher® with Foam Grip Handle
12" Full Size Simple Shear Cutting Finisher®
Carbide Tipped Woodturning Lathe Tool with 17" Interchangeable Foam Grip Handle
The modern alternative to conventional bowl and spindle gouges. With
Simple Woodturning Tools®
it’s all turning and no sharpening so you can start turning immediately.
The introduction of carbide tipped wood turning tools has greatly simplified woodturning.
Gone forever is the long learning curve where precise angles and special tool presentation techniques must be mastered. Also gone is the need to master many sharpening techniques before you can even begin to turn, not to mention the expense of all that sharpening equipment.
Now turning wood with the
Simple Shear Cutting Finisher®
that's offered here is as simple as these 4 steps.
Position the tool rest as close to the work as possible so the carbide cutter is at the lathe center line.
Place the tool on the tool rest with the tool shaft parallel with the floor.
Rotate the tool handle about its axis (similar to twisting a motorcycle throttle) approximately 35° in the direction you will be cutting.
While securely holding the tool slowly plunge the carbide cutter into the work.
As you begin to move the tool across the turning and your project takes shape, you will quickly discover how well these carbide tools cut and how simple it is to make beautiful turnings. It won’t be long until you are experiencing the true joy of woodturning that many thousands of fellow wood turners enjoy.
The
Simple Shear Cutting Finisher®
provides the very best surface finish possible with a carbide tipped wood turning tool.
The reason for this is the saucer shaped carbide cutter. The round tool shaft allows the tool to be rotated about its axis so the cutter is presented to the work at an angle.
This creates a shearing cut much like a conventional bowl or spindle gouge and leaves a superior surface finish compared to other woodturning tools that are held flat and make scraping cuts. Although this is a great benefit on all types of wood it is especially important when cutting soft wood such as spalted Maple.
Flat topped carbide cutters can leave tear out when used on really soft wood. However, the saucer shaped carbide cutter used on the
Simple Shear Cutting Finisher®
cleanly slices the soft fibers off the vessel due to the shear cutting action, similar to conventional bowl and spindle gouges. The result is a far superior surface finish.
As with all
Simple Woodturning Tools®
it's all turning and no sharpening. When the small area of this cutter you're using finally becomes dull, simply loosen the screw and rotate the cutter and you will have a super sharp tool once again.
Simple Shear Cutting Finisher®
technical details:
Carbide cutter - ½” diameter - saucer shaped shear cutting
Overall tool length – 12"
Tool Shaft – Solid steel  5/8” diameter beautifully nickel plated
Handle tang - ½" diameter x 2½" length
T15 Torx wrench included
Interchangeable Handle Details:
Comfortable foam rubber grip over a solid aluminum core.
Overall length 17"
Outside diameter 1-3/8"
Opening for tool 1/2" diameter
Tools are easily changed by loosening the two stainless steel Allen set screws
Allen wrench included
Payment
Shipping
Returns
We accept credit cards or Paypal.
All items ship the next business day directly from our shop in Ramsey, Minnesota. We do not ship on major US Holidays such as Christmas or Thanksgiving.
We ship worldwide. International orders do not include the cost of customs fees or your local duty or taxes.
Products returned for a refund are accepted provided they are returned, at the buyers expense, within 30 days of purchase in new resalable condition. Please use eBay's return procedure so we can issue your refund correctly.
Carbide Lathe Tools
Simple Hollowing System
Replacement Carbide Cutters
Lawn Striping Kits
We are Harrison Specialties
Harrison Specialties is a family-owned and operated machining and manufacturing company located in Ramsey Minnesota. Our American-made product lines include carbide tipped Simple Woodturning Tools and lawn stripers for commercial zero turn lawnmowers. Simple Woodturning Tools with carbide tips cutters are available in full size and mid size models. Many different cutter shapes are available on these tools. They make it possible to turn virtually any project from a large-size bowl to finely detailed spindles to small custom pens. The Simple Hollowing System makes it very easy to hollow out any shape turning. Even a closed form vessel is possible with Simple Swan Neck Hollower tool. Lawn stripers are steel rollers mounted at the rear of the mower deck on a zero turn commercial lawn mower. Professional lawnmowers use these striping kits to create decorative patterns while mowing lawns. Many times they’re referred to as “ballpark stripes” because they remind us of the stripes seen on professional baseball fields. Zero turn striping kits are made for many types of machines such as John Deere, eXmark, Toro, Hustler, Bad Boy and others.
Powerful eBay listing templates by 3Dsellers