AgGPS Trimble NavControllerIII for CNH Vehicles and Steering Systems Autopilot

Description

AgGPS NavController III For Steering Control Systems Nav3 55566-00 for Autopilot
p/n 55566-00  Trimble AP Configured NavController III
p/n 56694-00  Cable Kit, Case IH Hybrid
p/n 67120  Cable Assy, Case IH Hybrid to GPS
p/n 75741  Cable Assy, CFX-750/FMX/FM-750/FM-1000 to Nav II w/ Port Replicator
56694-00-E06  Hybrid Installation Instructions
Trimble NavController III Autopilot Streering System
The Trimble Autopilot streering system with NavController III automatically steers your vehicle on line with maximum precision.
In addition to cables, hydraulic components and other parts, the Autopilot streering system includes the Autopliot streering system with NavController III Which uses internal sensors and GPS data to correct roll, pitch and yaw.
Features:
Precision guidance
Reduction of operator fatigue
Increase in safety
Operator freedom to monitor the operations within the cab
Warning for the operator such as end of row
Operation:
On Slopes
During day or night
In dusty or low visibility conditions
The autopilot system is compatible with the following:
TMX-2050 display
GFX-750
FmX integrated display
CFX-750 Display
EZ-Guide 500 Lightbar
Specifications:
Size
200 mm (wide) x 225 mm (long_)  x 60 mm (deep) (7.87 in wide x 8.86 in long x 2.36 in deep)
Operating Temperuature
-30 °C though + 70 °C (-22 öF though + 158 °F)
Stroarege Temperuatre
INpute Coltage Range
+10 to +16 VDC
Operational current
-10 A peak, <2.5 amps average
Valve drive output
12 VDC -6 Max, 3 amp continous
IP Protection Rating
IP66